Suitable workbench or table

• Must be at least 8 ft. (2.5 m) long for working on the 50 in. models

• Must be at least 10 ft. (3 m) long for working on the 57 in. models

#0, #1, #2, and #3 Phillips screwdrivers

³/₃₂ in., 3 mm, 4 mm, and 8 mm hex bits or wrenches

10 and 15 mm socket

T-10 TORX^® screwdriver (for removing the electronics cover)

29 mm socket or wrench (for replacing the PCB)

⁹/₁₆ in. (15 mm) socket (for removing the propeller)

36 mm or adjustable wrench (for replacing the coil cable)

Torque wrench

• With 4 mm, 6 mm, and 8 mm hex bits

• Capable of measuring torque from 0.5 N-m (4.5 lbf-in) to 17 N-m (150 lbf-in)

Synthetic or marine grade general-purpose grease

Needle-nose pliers

Dielectric grease (for replacing the power cable or coil cable)