Skip to main content

Installing Batteries

NOTICE

To prevent damage, thoroughly wipe dry and air dry the device and battery compartment before installing the batteries or turning on the device.

The handheld device operates using two AA batteries (not included). Use lithium batteries with 1.5 V nominal voltage for best results. Do not use lithium batteries with a higher voltage.

  1. Turn the D-ring counter-clockwise, and pull up to remove the cover.
  2. Insert two AA batteries, observing polarity.

    Battery installation
  3. Replace the battery cover, and turn the D-ring clockwise.
Copyright © Garmin. All rights reserved.GUID-3B08322B-C8CA-4CA0-B113-48A7E387A983 v1