Skip to main content

Connecting the Transducer to a Chartplotter

The built-in 12-pin transducer is compatible with select Garmin® chartplotter models. Go to garmin.com or contact your Garmin dealer for more information.

  1. Route the transducer cable to the installed chartplotter.
  2. Install the locking collar on the end of the transducer cable.
  3. Connect the transducer cable to the transducer port on the back of the chartplotter.

    You can refer to the instructions provided with your chartplotter to identify the transducer port.

GUID-3A9C1CE0-D2CD-4415-B65F-6F1FF9701E2D v2
March 2025
© 2024 Garmin Ltd.