Drill and a ⁵/₁₆ in. (8 mm) drill bit

#1 Phillips screwdriver

#2 Phillips screwdriver

3 mm and 4 mm hex bits or wrenches (two 4 mm recommended)

⁹/₁₆ in. (14 mm) socket

Torque wrench

Circuit breaker rated for continuous 60 A

Trolling motor plug and receptacle rated for 60 A or greater (optional)

6, 4, or 2 AWG (16, 25, or 35 mm²) wire for extended runs of the power cable

Solder and heat-shrink tubing, if extending the power cable

Stainless steel pan head ¹/₄-20 (M6x1) bolts (if the included bolts are not long enough to mount the motor to the deck)