Skip to main content

Connecting the Active Speaker to the VHF Radio and Handset

Before you connect the active speaker to the VHF radio and handset, you should mount the active speaker (Active Speaker Mounting Considerations).

  1. Route the female end of the included extension cable from the speaker mounting location to the VHF radio.
  2. Connect the extension cable to the GHS 11 STATION 1 port on the VHF radio.
  3. Connect the male end of the extension cable to the short cable from the active speaker.
  4. Route the long cable from the active speaker to the handset connector mounting location.
  5. If necessary, install the cable from the active speaker in the mounting surface (Installing the Handset Connector in the Mounting Surface ).
  6. Connect the handset to the long cable from the active speaker.
Copyright © Garmin. All rights reserved.GUID-395B9869-0DCF-4E17-A266-0D9FF08A27DE v3