Connection Considerations
You must connect the VHF 315 radio to power, to a GHS™ 11 handset, a VHF antenna, and a GPS source. When making connections to the device, observe the following considerations.
-
You must connect the primary handset (installed in the wheelhouse or adjacent room, in accordance with FCC law) to the GHS 11 STATION 1 port.
-
You can connect up to three handsets to the radio. You can purchase additional handsets from your Garmin® dealer.
-
You can install the included active speaker (optional) in-line with any handset connected to the radio. You can purchase additional active speakers from your Garmin dealer.
-
You can connect the radio to a GPS source through the NMEA 2000® network or through an external GPS antenna (not included).
- Connecting to Power
- Connecting a VHF Antenna
- Connecting the Active Speaker to the VHF Radio and Handset
- Connecting the Handset to the VHF Radio Using an Extension Cable
- NMEA 2000 Connections
- Connecting the Device to a Remote GPS Antenna
- Connecting to a Hailer Horn or PA Speaker
- NMEA 0183 Device Connections