GHS 11 Mounting Considerations
This device should be mounted in a location that is not exposed to extreme temperatures or conditions. The temperature range for this device is listed in the product specifications. Extended exposure to temperatures exceeding the specified temperature range, in storage or operating conditions, may cause device failure. Extreme-temperature-induced damage and related consequences are not covered by the warranty.
-
You must install the primary handset (connected to the GHS 11 STATION 1 port) in the wheelhouse or an adjacent room, in accordance with FCC law.
-
To avoid interference with a magnetic compass, do not install the handset closer than 60 cm (23.6 in.) to a compass.
-
If you do not install the active speaker, you can use the included 10 m (32 ft.) extension cable to connect the handset to the VHF radio. You must select a mounting location for the handset where you can connect the extension cable to the handset and to the GHS 11 STATION 1 port on the VHF radio. If needed, additional extension cables are available from your Garmin® dealer.
-
You can use the included screws to mount the handset connector and the handset cradle mount on your boat. If the included screws are not appropriate for the mounting surface, you must purchase suitable hardware.