LED Fuse Installation
You must install an inline fast-blow fuse on the positive wire at the power-source end of the LED cable for each speaker to protect the LEDs and the speaker from excessive electrical current. Failure to install a fuse could cause a fire resulting in property damage, serious personal injury, or death.
-
The fuse must be installed in a fuse holder intended for marine use.
-
The fuse must be installed on the positive wire on the power-source end of the LED cable.
-
The fuse must be installed for use with any power source, including a lighting controller.
-
Always use a fuse of the correct amperage rating and type for your speaker model.
|
Speaker Model |
Fast-blow Fuse Rating |
|---|---|
|
Fusion Apollo™ Series 10 in. Subwoofer with LED Lighting |
700 mA |
|
Fusion Apollo Series 12 in. Subwoofer with LED Lighting |
1000 mA |