Skip to main content

Accessing Data Over the Wi‑Fi Network

The Garmin Signal™ VHF radio broadcasts NMEA® 0183 messages over the Wi‑Fi® network. Compatible third-party devices and applications can connect to the Wi‑Fi network and integrate data from the radio and from other devices in your NMEA 2000® network (NMEA 0183 Messages).

  1. If necessary, enable the Wi‑Fi network on the radio (Configuring the Wi‑Fi Network).
  2. Connect the third-party device or application to the Wi‑Fi network.
  3. Select an option:

    • If the radio is connected to a compatible Garmin® chartplotter over the Garmin BlueNet™ network, select Menu icon > Settings > Garmin Marine Network.

    • If the radio is not connected to a compatible Garmin chartplotter, select Menu icon > Settings > Wi-Fi.

  4. Note the address shown in the IP Address field.

    This is the IP address used to connect to the radio.

  5. Connect the third-party device or application, using the IP address you noted in the previous step, and TCP port number 39150.
GUID-376DCF06-863E-4772-9B73-834F8852F379 v1
May 2026
© 2026 Garmin Ltd.