Setting the FUSION PartyBus Device as the DHCP Server
If you connected two FUSION PartyBus™ devices together directly, or connected more than two together using a network switch or wireless access point and did not install a router, you must configure only one FUSION PartyBus stereo to be the DHCP server.
-
Select
> 
> 
> 
> NETWORK > ADVANCED > ETHERNET IP > STATIC IP > SAVE.
-
Select
> > > > NETWORK > ADVANCED > DHCP SERVER > DHCP ENABLED > SAVE.
You can configure the IP address range of the DHCP server (DHCP Settings).