Activating Graphical Flight Plan Edit Mode:

NOTICE

Users must become familiar with the following procedures before flight to ensure adequate understanding of the Graphical Flight Plan Edit Mode.

With a flight plan active, navigate to the 'Map' or 'Weather' Application Page on the MFW.
  1. Touch the desired flight plan waypoint on the map, opening the Radial Menu. (The reroute will begin after the selected waypoint.)
  2. To activate Graphical Edit Mode, touch the Graphical Reroute Button on the Radial Menu.

Or:

  1. To adjust the flight plan by rubber banding, touch and hold a flight plan waypoint or route until the white Search Radius circle appears.
  2. Continue to touch and hold while dragging the grab point (rubber banding) to a new location on the map.

    Once this initial modification has been made, additional modifications may also be made before accepting any changes.

Once Graphical Flight Plan Mode is activated, the flight plan can be modified using either the rubber band method or by tapping the map to insert waypoints. The following procedures describe each method individually; however, they can be used together.

190-03123-21 Rev B
October 2026