Rerouting The Active Flight Plan By Using The Graphical Re-route Button On The Radial Menu:
The Graphical Reroute Button on the Radial Menu may be used to activate Graphical Edit Mode. Once Graphical Edit Mode is active, the Modification Button Bar is displayed and waypoints or locations on the map may be touched to reroute a new leg in the Active Flight Plan.
- With a flight plan active, navigate to the 'Map' Application Page on the MFW.
- Touch the desired flight plan waypoint on the map. (The reroute will begin after the selected waypoint.) The Radial Menu is displayed.
- To activate Graphical Edit Mode, touch the Graphical Reroute Button on the Radial Menu.
-
Select the waypoint for which to
define the new leg:
If only one waypoint lies within the inner radius of the Radial Menu, that waypoint and the rerouted leg to and from it shall be displayed in cyan on the map.
Or:
If no waypoints lie within the inner radius of the Radial Menu, a temporary user waypoint is created and the rerouted leg to and from it shall be displayed in cyan on the map.
Or:
If multiple waypoints lie within the inner radius of the Radial Menu, the 'Select From Multiple' Window is displayed, listing all waypoints within the inner radius. Touch the button for the desired waypoint. That waypoint and the rerouted leg to and from it shall be displayed in cyan on the map.
- If necessary, touch the Undo Button to undo the most recent change made before continuing in Graphical Edit Mode.
-
If rerouting multiple waypoints,
touch and select each new waypoint, as follows, and repeat steps 5 and 6 until
all desired changes are complete:
If only one waypoint is located at the point that was touched on the map, that waypoint and leg to and from it shall be displayed in cyan on the map.
Or:
If no waypoints are located at the point that was touched on the map, a temporary user waypoint is created and the leg to and from it shall be displayed in cyan on the map.
Or:
If multiple waypoints are located near the point that was touched on the map, the 'Nearest Items' Window is displayed, listing all waypoints near the touch point. Touch the button for the desired waypoint. That waypoint and the new leg to and from it shall be displayed in cyan on the map.
-
Touch the Activate Button to apply all changes to the
active flight plan and exit Graphical Edit Mode.
Or:
Touch the Cancel Edit Button then touch the OK Button to remove all changes and exit Graphical Edit Mode.