Skip to main content

Resetting the Data and Settings

Before you can reset the data and settings, you need access to the GTB 10 hub.

You can delete your user data and reset all settings to the factory default values.

NOTE: The settings synchronized with other devices on the Garmin® Marine Network will not be cleared.
  1. Verify the GTB 10 hub is on and is held in a full-power state.
  2. Using a slim object, such as an unbent paperclip, press and hold the recessed FACTORY RESET button.

    The STATUS LED flashes green and then turns red after approximately 20 seconds.

  3. After the STATUS LED turns red, release the FACTORY RESET button.
GUID-1A1F58AA-95F0-4800-804B-4976606478EE v5
November 2023
© 2020 Garmin Ltd.