Skip to main content

Connecting to the OnDeck Wi‑Fi Network

NOTE: If the GTB 10 hub is not connected to a compatible chartplotter through the Garmin® Marine Network, you must complete these steps within 30 minutes of turning on the device. The device automatically turns off after 30 minutes of inactivity.

You must connect the mobile device running ActiveCaptain® to the OnDeck™ Wi‑Fi® network.

  1. If the STATUS LED is off, press the Power button button to turn on the GTB 10 hub.
  2. If the GTB 10 hub is connected to a compatible Garmin chartplotter through the Garmin Marine Network, set up the OnDeck Wi‑Fi network using the chartplotter.

    See the chartplotter manual for more information.

  3. On the mobile device, select Settings > Wi-Fi.
  4. Bring the mobile device within 32 m (105 ft.) of the GTB 10 hub.
  5. Select the Garmin network, and enter the password.
    TIP: If the GTB 10 hub is not connected to a chartplotter, the default network name is Garmin and the default password is garminmarine.

    If the GTB 10 hub is connected to a chartplotter, use the network and password you set up in step 2.

After connecting to the Garmin Wi‑Fi network, you must open the ActiveCaptain app.

GUID-1A1F58AA-95F0-4800-804B-4976606478EE v5
November 2023
© 2020 Garmin Ltd.