Installing the Fist Microphone and Mount

Before you can attach the fist microphone mount to your dashboard, you must select a suitable location on the dashboard.

WARNING

It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and does not block your view of the road during the safe operation of your vehicle.

NOTICE

Avoid wires, gauges, air bags, air bag covers, heating, ventilation, and air conditioning and other items when drilling pilot holes and attaching the mount to the vehicle. Garmin® is not responsible for any damages or consequences arising from the installation.

NOTE: This feature is not available on all product models.
  1. Align and insert the connector on the fist microphone onto the Group Ride mount.

    Group ride radio with fist microphone cable being installed
  2. Tighten the collar around the connected cable.
  3. Place the mount Call-out number one on the selected location.

    Fist microphone mount installation with callouts
  4. Using the mount as a template, mark the three screw locations.
  5. Drill pilot holes (optional).

    For some types of mounting material, drilling pilot holes is necessary.

  6. Securely fasten the mount to the surface using the supplied screws Call-out number two.
  7. Slide the fist microphone Call-out number three onto the mount.

    Fist microphone being placed on the mount with a callout
GUID-16B1D74D-857B-4FFB-8DE2-A0960FE0D090 v7
June 2024