Skip to main content

Mounting Your Tread Base Edition in a Vehicle

NOTICE

Before mounting the device, check the local laws pertaining to windscreen mounting.

WARNING

Do not use the suction cup mount on a motorcycle.

WARNING

See the Important safety and product information guide in the product box for product warnings and other important information.

NOTE: The vehicle mount is not included with all device models. Go to garmin.com to purchase optional accessories.
  1. Plug the automotive power cable Call-out number one into the port Call-out number two on the device.

    Device and power cable connecting to the automotive mount with callouts
  2. Remove the clear plastic from the suction cup Call-out number three.
  3. Clean and dry your windscreen and the suction cup with a lint-free cloth.
  4. Press the suction cup to the windscreen, and flip the lever Call-out number four back toward the windscreen.
  5. Snap the cradle Call-out number five onto the suction-cup arm.
  6. Fit the bottom of your device into the cradle.
  7. Press the device into the cradle until it snaps into place.
  8. Plug the other end of the automotive power cable into a power outlet.
GUID-16B1D74D-857B-4FFB-8DE2-A0960FE0D090 v7
June 2024
© 2020 Garmin Ltd.