Mounting the Tread Audio Box Black Box Device

Before you mount the device, you must select a mounting location, and determine what screws and other mounting hardware are needed for the surface.

  1. Place the black box device in the mounting location, and mark the location of the pilot holes.
  2. Drill a pilot hole for one corner of the device.
  3. Loosely fasten the device to the mounting surface with one corner, and examine the other three pilot-hole marks.
  4. Mark new pilot-hole locations if necessary, and remove the device from the mounting surface.
  5. Drill the remaining pilot holes.
  6. Secure the device to the mounting location.
GUID-157A2412-594F-45D8-A5EE-5A5327DA0914 v8
October 2024