Setting a Custom Dive Alert
- Hold MENU.
- Select Dive Setup.
-
Select an option:
-
Select Scuba Alerts.
-
Select Apnea Alerts.
-
-
Select an option:
-
Select Add Alert to add a new alert.
-
Select the alert name to edit an existing alert.
-
- If necessary, enable the alert.
-
Select an option:
NOTE: Not all options are available for all alert types.
-
Select Depth to specify the depth that should trigger the alert.
-
Select Time to specify the time interval that should trigger the alert.
-
Select Speed to specify the vertical speed threshold that should trigger the alert.
NOTE: You can set the alert to trigger when your vertical speed exceeds or drops below the selected speed. -
Select Interval to specify if the alert should trigger once or at a repeat interval.
-
Select Direction to specify if the alert should be enabled for ascending, descending, or both.
-
Select Dive Types to specify which dive modes should allow the alert to trigger.
-
Select Sounds to set the alert tone, vibration, or neither.
-
Select Pop-up to enable a pop-up notification for the alert.
-
Select Preview Alert to see how the alert appears and sounds during a dive.
-