Preparing the Stand Route the speaker's power and connection cables through the stand's post 1. Using the included hex key, attach the top plate to the stand using the screws 2 that were removed from the top of the speaker's post. Using a torque screwdriver, tighten the screws to 4.5 N-m (40 in-lbs). HomePreparing the Stand
Preparing the Stand Route the speaker's power and connection cables through the stand's post 1. Using the included hex key, attach the top plate to the stand using the screws 2 that were removed from the top of the speaker's post. Using a torque screwdriver, tighten the screws to 4.5 N-m (40 in-lbs). HomePreparing the Stand
