Installing and Powering the Garmin Speak Device

NOTE: For the best results, especially in low temperature environments, you should allow the adhesive on the metal disc to bond to the windshield for 24 hours before installing the device onto the mount. Failure to allow adequate bonding time may cause the adhesive to detach from the windshield.
  1. Place the device and mount onto the metal disc.
  2. Plug the power cable into the USB port on the device.

    Interior view of a windshield with the device and power cable
  3. Route the power cable to your vehicle power outlet.

    The included long, lightweight power cable is designed to be routed out of sight. To hide the cable, you can route it around the windshield and tuck it into the gap between the windshield and the trim.


    Interior view of a windshield with the power cable routed around the edge
  4. Plug the Garmin Speak™ power cable into a power outlet in your vehicle.
  5. If necessary, turn on the vehicle ignition switch to provide power to the power outlet in your vehicle.

    The device turns on.

  6. Follow the on-screen instructions to complete the initial device setup (Pairing with Your Smartphone).
Copyright © Garmin. All rights reserved.GUID-EB6C4100-FA0B-4246-8D2B-1A253E35F500 v3