Skip to main content

Installing the Handlebar Base to the Clutch-Clamp or Brake-Clamp Brackets

  1. Remove the two factory bolts on your clutch-clamp or brake-clamp bracket Callout number one.


    NOTE: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch-clamp or brake-clamp bracket.
  2. Thread the new bolts Callout number two through the handlebar base, spacers Callout number three, and clutch-clamp or brake-clamp bracket.
  3. Tighten the bolts to secure the base.
Copyright © Garmin. All rights reserved.GUID-29F01505-8BFA-4D12-A2FA-E78E3D09FE96 v4