Skip to main content

Attaching the Power Cables to the Motorcycle Mount

  1. Thread the power cable connector Call-out number one through the top of the opening in the motorcycle mount.


  2. Slide the cable down to the bottom of the opening Call-out number two and pull the cable back until it is snug.
  3. Screw the black screw Call-out number three into the back of the mount Call-out number four to hold the cable in place.


  4. Thread the weather cap Call-out number five through the top hole and press it into the hole.


Copyright © Garmin. All rights reserved.GUID-515D5BAE-484E-4875-B3D0-BEEF76440982 v3