Skip to main content

Installing the Tripod

  1. Screw the tripod ball mount Callout number one onto the tripod assembly Callout number two.

    Tripod ball mount assembly with callouts
    NOTE: You should tighten the tripod ball mount so it does not move during use. The tripod ball mount uses 1/4"-20 thread size and is compatible with most tripods. For best performance, do not raise the device beyond waist height or a total height of 1.2 m (4 ft.).
  2. Completely depress and hold the tripod release lever Callout number three.

    Close-up view of the tripod assembly attaching to the bottom of the device, including callouts
  3. While depressing the tripod release lever, insert the tripod ball mount into the socket Callout number four.
    NOTE: The ball mount should insert easily into the socket. If it is difficult to insert, you should confirm the tripod release lever is depressed completely.
Copyright © Garmin. All rights reserved.GUID-8042F2C8-C319-4963-A692-B42C26A10936 v3