System Settings
To prevent damage to the device in wet conditions, you must disable the external microphone setting when the device is not connected to a USB cable.
Hold MENU, and select System.
- GPS
-
Enables the device to receive GPS satellite signals.
NOTE: The GPS setting must be set to On to enable Auto Record.NOTE: Your device records GPS position data at all times when GPS is on. This data is not collected by Garmin®. - Orientation
-
Sets the camera to capture correctly oriented video and photos with the screen facing up or down (Inverting the Camera Orientation).
- Microphone
-
Enables the internal or external microphone.
TIP: If wind noise is an issue when recording video, you can select Off to record video without audio. - Record Light
-
Turns the recording light on or off.
- Tones
-
Turns audible tones on or off.
- Time/Date
-
Sets the time and date formats.
- Units
-
Sets the units of measure.
- Language
-
Sets the on-screen text language.
- Format
-
Sets the video standard (Setting the Video Format).
- Auto Off
-
Turns off the device automatically when the device has not been used for five minutes.
- Reset Settings
-
Restores the default device settings.
- About
-
Displays important software information and your unit ID.