Skip to main content

Taking Extended Time-Lapse Photos

  1. Connect your camera to the Garmin® VIRB® app.
  2. From the app viewfinder, select Gear symbol > Photo Mode > Time-lapse.
  3. Select Type > Extended.
  4. Select Start Time Mode, and select the time of day when the camera should start taking time-lapse photos.

    If you select Now, the camera starts taking pictures immediately after you select the photo key.

  5. Select Interval, and select a time interval between photos.
  6. Select Duration Mode, and select the amount of time for which the camera should continue taking photos.

    If you select Continuous, the camera continues taking photos until you stop it manually.

  7. Aim the camera at the subject of the time-lapse photos.
  8. On the camera, select Camera symbol.

    At the start time, the device takes a series of photos at the selected interval. The camera stops taking photos automatically after the selected duration has elapsed.

    NOTE: The camera appears to be off while taking extended time-lapse photos. To preserve power, the screen, LED, and other features are disabled, but the camera continues to take photos.
  9. To manually stop taking photos, hold POWER to turn on the camera, and select Camera symbol.
Copyright © Garmin. All rights reserved.GUID-7C8599D3-48DE-4599-9EB4-B6217680D3A2 v5