Adding a Camera to the Network

Before you can add a camera to a camera network, you must complete one of these tasks:

Set up a camera network using a VIRB^® camera access point (Setting Up a Camera Network).
Connect one or more cameras and the Garmin^® VIRB app to a Wi‑Fi^® network (Connecting to a Wi‑Fi Network).

If the Garmin VIRB app is connected to your cameras using a network or access point, you can add cameras to the camera network.

With the camera network turned on, turn on the new camera.
On the new camera, turn on the Wi‑Fi radio (Turning the Wi‑Fi Radio On or Off).

The new camera broadcasts a Wi‑Fi access point.
On your mobile device, go to the Wi‑Fi settings, and connect to the access point broadcast by the new camera.

TIP: The access point name and password appear on the new camera's screen.

For more information about connecting your mobile device to a Wi‑Fi network, see your mobile device owner's manual.
On your mobile device, start the Garmin VIRB app.

The viewfinder for the new camera appears.
Select > Wi-Fi Connections.

A list of nearby Wi‑Fi access points appears.
Select the Wi‑Fi access point or network used by your existing camera network, and enter the network password.

This could be a VIRB camera access point or a Wi‑Fi network.

The app and the new camera connect to the network. You can select in the viewfinder to switch between your connected cameras, including the new camera (Switching Cameras).

VIRB® 360