Select DIP to set a waypoint for the desired landing location.

Select Drop Alt. to set the drop altitude AGL (in feet) when the jumpmaster exits the aircraft.

Select Open Alt to set the open altitude AGL (in feet) when the jumpmaster opens the parachute.

Select Forward Throw to set the horizontal distance traveled (in meters) due to aircraft speed.

Select Crs. to HARP to set the direction traveled (in degrees) due to aircraft speed.

Select Wind to set the wind speed (in knots) and direction (in degrees).

Select Constant to fine-tune some information for the planned jump. Depending on the jump type, you can select Percent Max., Safety Factor, K-Open, K-Freefall, or K-Static and enter additional information (Constant Settings).

Select Auto to DIP to enable navigation to the DIP automatically after you jump.

Select GO TO HARP to start navigation to the HARP.