Calibrating Your Foot Pod by Distance

Before you can calibrate your device, you must pair your device with the foot pod (Pairing Your ANT+ Sensors).

For best results, the foot pod should be calibrated using the inside lane of a regulation track or an exact distance. A regulation track (2 laps = 0.5 mi. or 800 m) is more accurate than a treadmill.

  1. Select the action key.
  2. Select Setup > ANT Sensor > Foot Pod > Calibrate > Distance.
  3. Select Start to begin recording.
  4. Run or walk 0.5 mi. or 800 m.
  5. Select Stop.
Copyright © Garmin. All rights reserved.GUID-89D11C81-753E-4433-B182-FD558B086B29 v4