Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the device uses automatic calibration at your GPS starting point by default. You can manually calibrate the barometric altimeter if you know the correct elevation or the correct sea level pressure.

  1. Select the action key.
  2. Select Setup > Sensors > Altimeter.
  3. Select an option:
    • Select Auto Cal. > At Start to calibrate automatically from your GPS starting point.

    • Select Auto Cal. > Continuous to calibrate automatically with periodic GPS calibration updates.

    • Select Calibrate to enter the current elevation or sea-level pressure.

Copyright © Garmin. All rights reserved.GUID-89D11C81-753E-4433-B182-FD558B086B29 v4