Viewing a Vehicle Camera
Before you can view a vehicle camera, a compatible camera must be connected to the stereo.
Before you can view cameras automatically, you must enable camera auto-display options (Enabling Camera Auto-Display).
-
Select an option to view a vehicle camera:
-
To automatically show the backup camera, place the vehicle into reverse.
-
To automatically show a side-mirror camera, activate the vehicle turn signal.
NOTE: This option is typically available only as a manufacturer option on select vehicles, and may not be available on your vehicle. -
To manually show the backup camera, select
> Camera.
The vehicle camera view appears on the screen.
-
-
If available, select
to mute or unmute audio from the camera microphone.
TIP: If the vehicle camera microphone is connected and this option is not available, verify the microphone is enabled (Enabling the Vehicle Camera Microphone). -
Select an option to resume normal operation:
-
Take the vehicle out of reverse.
-
Deactivate the vehicle turn signal.
-
Select
.
-