Configuring the DSP Settings
You must download and install the FUSION-Link™ remote control app on your compatible Apple® or Android™ device before you can configure the DSP settings (FUSION-Link Wireless Remote Control App).
You can configure the DSP settings to optimize the sound on each zone with the installed speakers, amplifiers, and environment.
- From the settings menu on your Apple or Android device, connect to the stereo using Bluetooth® technology, or connect to the same wireless network as the stereo.
- Open the FUSION-Link remote control app on your compatible Apple or Android device.
- If necessary, select the stereo you want to configure.
-
Select
> MUSIC SETTINGS.
- Select a zone.
- Select DSP SETTINGS.
- Configure the DSP settings as needed, depending on the models of FUSION® speakers and amplifiers connected to the zone.
- Repeat these steps for each zone.
-
After you have finished configuring the DSP settings for all zones, select an option:
-
On an Apple device, select
> Zone > SETTINGS > SEND DSP SETTINGS
-
On an Android device, select
> Zone > SEND DSP SETTINGS.
-