Skip to main content

Viewing a Vehicle Camera

Before you can view a vehicle camera, a compatible camera must be connected to the stereo, and the remote must be docked.

  1. Select an option to view a vehicle camera:

    • To automatically show the backup camera, place the vehicle into reverse.

    • To automatically show a side-mirror camera, activate the vehicle turn signal.

      NOTE: This option is typically available only as a manufacturer option on select vehicles, and may not be available on your vehicle.

    • To manually show the backup camera, select Camera.

    The vehicle camera view appears on the screen.

  2. If available, select Camera microphone to mute or unmute audio from the camera microphone.
    TIP: If the vehicle camera microphone is connected and this option is not available, verify the microphone is enabled (Enabling the Vehicle Camera Microphone).
  3. Select an option to resume normal operation:

    • Take the vehicle out of reverse.

    • Deactivate the vehicle turn signal.

    • Select Back.

Copyright © Garmin. All rights reserved.GUID-0E9D9439-6B91-4B50-8492-83D80CC16653 v4