Connecting the Remote to the Dock Manually

By default, the remote connects to the dock automatically each time you place it in the dock. appears in the status bar when the remote successfully connects to the dock.

If the remote does not connect automatically, or if you lose the connection, you can manually connect the remote and dock.

Place the remote in the dock (Docking the RV HUB Remote).
Select Settings > Wi-Fi > RV HUB DOCK.
Verify the mode switch at the top of the screen is set to Access Point.
Enter an access point name (SSID), an access point password (PSK), and a security method (optional).
Select to return to the Wi-Fi settings.
Select RV HUB Remote.

A list of nearby networks and access points appears.
Select the access point name you entered in step 4.

NOTE: The default name is RV-BBT60X-XXXXXXXXXX, with each X replaced by a number.
If necessary, enter the password.

The remote connects to the dock, and appears in the status bar. You can control the media playback on the dock using the remote.

RV-BBT600 Series

Previous Topic

Next Topic

Download PDF

Print Page

Connecting the Remote to the Dock Manually