Running Dynamics Pod

Remove the pod from the flexible silicone clip by stretching the material around the pod.

On the back of the pod, twist the cover Callout number one

counter-clockwise to unlock it.

Remove the cover and the battery Callout number two

.

TIP: You can use a magnet to remove the battery from the cover.

NOTE: You may find some lubricant residue on the factory-installed battery. Do not apply any gels or lubricants to the new battery.

Wait 30 seconds.

Insert the new battery into the cover, observing polarity.

NOTE: Do not damage or lose the O-ring gasket.

Replace the cover, and rotate clockwise to lock it.

NOTE: Do not pinch the O-ring gasket. The O-ring gasket should not be visible when the cover is locked.

Insert the pod into the flexible silicone clip by stretching the material around the pod.

The running icon on the pod must be aligned with the running icon inside the clip.

Replacing the Battery