Skip to main content

Transmitting

To communicate with other Rino® and GMRS or UHF CBRS/PRS radio users, you must be on the same channel and code (Channels and Codes).

  1. Hold PTT.
  2. Speak into the front of the device.
  3. After you are finished speaking, release PTT.

    After you release PTT, the radio transmits your position information, and you cannot hear incoming transmissions until your transmission is complete . A roger tone sounds on your radio and on the radios receiving your transmission to confirm that the transmission is complete.

    NOTE: You can change or disable the roger tone (Setting the Device Tones).
Copyright © Garmin. All rights reserved.GUID-5AE51F96-B4E7-4A5A-9C9D-3149DF79FE80 v3