Skip to main content

Charging the Battery

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer.

You must charge the device fully before using it for the first time.

Before you can connect the straight connector of the USB cable to your device, you may need to remove optional mount accessories.

NOTE: The device does not charge when outside the approved temperature range (Specifications - Rino 7xx).

You can charge the battery using a USB port on your computer if necessary, but using the included AC adapter is the fastest way to charge the device.

  1. Pull up the weather cap Callout number one from the mini-USB port Callout number two.

    Close-up view of the charging port and weather cap with callouts
  2. Plug the small end of the USB cable into the mini-USB port.
  3. Plug the large end of the USB cable into an AC adapter or a computer USB port.
  4. If necessary, plug the AC adapter into a standard wall outlet.

    When you connect the device to a power source, the device turns on.

  5. Charge the battery completely.
    TIP: You can hold Power for two seconds to view the charge level and place the device into power saving mode.
Copyright © Garmin. All rights reserved.GUID-5AE51F96-B4E7-4A5A-9C9D-3149DF79FE80 v3