Adjusting Gain on the Radar Screen Automatically
The automatic gain setting for each radar mode is optimized for that mode, and may differ from the automatic gain setting used for another mode.
NOTE:
Depending upon the radar in use, the gain setting configured for use in one radar mode may or may not be applied to other radar modes or to the Radar overlay.
NOTE:
Not all options and settings are available on all radar and chartplotter models.
- From a radar screen or the radar overlay, select .
-
Select an applicable option for the connected radar:
-
To set the gain automatically once, based on average conditions, the range of the radar signal, and the selected radar mode, select Auto.
The chartplotter does not adjust the gain automatically in response to changing conditions.
-
To adjust the gain automatically for changing conditions, select Auto Low or Auto High.
-
To adjust the gain automatically to show birds over the surface of the water, select Auto Bird.
-