Skip to main content

Enabling and Adjusting a Radar No Transmit Zone

You can indicate an area within which the radar scanner does not transmit signals.

NOTE: This feature is not available on all radar and chartplotter models.
  1. From a radar screen, select Menu > Radar Setup > Enable No Transmit Zone.

    The no-transmit zone is indicated by a shaded area on the radar screen.

  2. Select Adjust No Transmit Zone > Move No Transmit Zone.
  3. Select Angle 1, and select the new location for the first angle.
  4. Select Angle 2, and select the new location for the second angle.
  5. Select Done.
Copyright © Garmin. All rights reserved.GUID-871A9CBC-B2B9-4771-BF1A-58BB3DB7060F v11