Serial Interface Settings

Select Setup > System > Interface.

NOTE: The GPSMAP® 86 device can output NMEA® 0183 sentences to a computer using a USB connection; the device does not connect directly to on-board equipment.
Garmin Spanner

Allows you to use the device USB port with most NMEA 0183-compliant mapping programs by creating a virtual serial port.

Garmin Serial

Sets the device to use a Garmin® proprietary format to exchange waypoint, route, and track data with a computer.

NMEA In/Out

Sets the device to use standard NMEA 0183 output and input.

Text Out

Provides simple ASCII text output of location and velocity information.

MTP

Sets the device to use Media Transfer Protocol (MTP) to access the file system on the device instead of mass storage mode.

Copyright © Garmin. All rights reserved.GUID-3D87F918-B81E-4956-8EFC-5C8C977D195D v8