Skip to main content

Adjusting the VRM and the EBL

Before you can adjust the VRM and the EBL, you must show them on the Radar screen (Showing the VRM and the EBL).

You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection point of the VRM and the EBL. The VRM and the EBL configured for one mode are applied to all other radar modes.

  1. From a Radar screen, select a new location for the intersection point of the VRM and the EBL.
  2. Select Drop VRM/EBL.
  3. Select Stop Panning.
Copyright © Garmin. All rights reserved.GUID-04FDF1B6-A046-468D-B3D9-5EC2E7202EAE v9