Adjusting the Wind Sensor Orientation
You should adjust this setting if the sensor does not face the front of the boat, exactly parallel to the center line.
NOTE:
The opening where the cable connects to the pole indicates the front of the sensor.
-
Estimate the angle, in degrees clockwise around the mast, by which the sensor points away from the center of the front of the boat:
-
If the sensor is facing starboard, the angle should be between 1 and 180 degrees.
-
If the sensor is facing port, the angle should be between -1 and -180 degrees.
-
- Select .
- Select the wind sensor.
- Select Wind Angle Offset.
- Enter the angle observed in step 1.
- Select Done.
Parent Topic: Wireless Wind Sensor