Using Steer-Pilot Mode with the BTW or CTS Setting
Before you can use steer-pilot mode with the Bearing to Waypoint (BTW) setting, you must connect the instrument to a GPS device through the NMEA 2000® network.
Before you can use steer-pilot mode with the Course to Steer (CTS) setting, you must connect the instrument to a GPS device, a heading sensor, and a speed sensor through the NMEA 2000 network.
You can use the instrument to help you steer to a waypoint on a connected GPS device.
-
From an instrument screen, hold
.
The instrument enters steer-pilot mode.
-
Select an option:
-
If BTW or CTS is shown, proceed to step 5.
-
If something other than BTW or CTS is shown, hold
until the text flashes.
-
-
Press
or 
to select
BTW or
CTS, and press .