Skip to main content

Replacing the Adhesive on the Disc

You can replace the adhesive on the metal disc to install the device in a new location. Your device includes one extra adhesive pad. Go to buy.garmin.com to purchase additional adhesive pads.

  1. If necessary, remove the old adhesive pad from the disc.
  2. Clean the disc.

    The disc must be free of dust, wax, oils, or coatings.

  3. Remove one side of the protective film from the new adhesive pad.
  4. Position the adhesive pad over the disc.
    TIP: The adhesive is extremely sticky. Do not touch the adhesive to the disc until the adhesive pad is properly aligned.
  5. Press the adhesive pad firmly onto the disc, and maintain pressure for 30 seconds.
  6. Place the metal disc into the device mount, and install it onto your windshield (Installing the Adhesive Disc onto Your Windshield).
Copyright © Garmin. All rights reserved.GUID-EB6C4100-FA0B-4246-8D2B-1A253E35F500 v3