Changing the QuickFit Bands

  1. Slide the latch on the QuickFit™ band, and remove the band from the watch.

    Close-up view of the band being replaced
  2. Align the new band with the watch.
  3. Press the band into place.
    NOTE: Make sure the band is secure. The latch should close over the watch pin.
  4. Repeat steps 1 through 3 to change the other band.
Copyright © Garmin. All rights reserved.GUID-5DDC7B78-0983-4434-93BF-23EBCC967966 v4