Data Fields
Some data fields require ANT+® accessories to display data.
- Battery Level
-
The remaining battery power.
- Battery Status
-
The remaining battery power of a bike light accessory.
- Beam Angle Status
-
The headlight beam mode.
- Cadence
-
Cycling. The number of revolutions of the crank arm. Your device must be connected to a cadence accessory for this data to appear.
- Cadence - Avg.
-
Cycling. The average cadence for the current activity.
- Cadence - Lap
-
Cycling. The average cadence for the current lap.
- Calories
-
The amount of total calories burned.
- Course Pt. Dist.
-
The remaining distance to the next point on the course.
- Dist. - Lap
-
The distance traveled for the current lap.
- Dist. - Last Lap
-
The distance traveled for the last completed lap.
- Dist. to Dest.
-
The remaining distance to the final destination. You must be navigating for this data to appear.
- Dist. to Go
-
During a workout or course, the remaining distance when you are using a distance target.
- Dist. to Next
-
The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.
- Distance
-
The distance traveled for the current track or activity.
- Elevation
-
The altitude of your current location above or below sea level.
- ETA at Destination
-
The estimated time of day when you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.
- ETA at Next
-
The estimated time of day when you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.
- GPS Accuracy
-
The margin of error for your exact location. For example, your GPS location is accurate to within +/- 3.65 m (12 ft.).
- GPS Signal Strength
-
The strength of the GPS satellite signal.
- Grade
-
The calculation of rise (elevation) over run (distance). For example, if for every 3 m (10 ft.) you climb you travel 60 m (200 ft.), the grade is 5%.
- Heading
-
The direction you are moving.
- Heart Rate
-
Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor.
- HR - Avg.
-
The average heart rate for the current activity.
- HR Graph
-
A line graph showing your current heart rate zone (1 to 5).
- HR - Lap
-
The average heart rate for the current lap.
- HR Zone
-
The current range of your heart rate (1 to 5). The default zones are based on your user profile and maximum heart rate (220 minus your age).
- Laps
-
The number of laps completed for the current activity.
- Light Configuration
-
The light network configuration mode.
- Lights Connected
-
The number of connected lights.
- Location at Dest.
-
The last point on the route or course.
- Location at Next
-
The next point on the route or course.
- Odometer
-
A running tally of the distance traveled for all trips. This total does not clear when resetting the trip data.
- Power
-
The current power output in watts. Your device must be connected to a compatible power meter.
- Power - 3s Avg.
-
The 3-second moving average of power output.
- Power - Avg.
-
The average power output for the current activity.
- Power - kJ
-
The accumulated work performed (power output) in kilojoules.
- Power - Lap
-
The average power output for the current lap.
- Power - Max.
-
The top power output for the current activity.
- Power Zone
-
The current range of power output (1 to 7) based on your FTP or custom settings.
- Speed
-
The current rate of travel.
- Speed - Avg.
-
The average speed for the current activity.
- Speed - Lap
-
The average speed for the current lap.
- Speed - Max.
-
The top speed for the current activity.
- Sunrise
-
The time of sunrise based on your GPS position.
- Sunset
-
The time of sunset based on your GPS position.
- Temperature
-
The temperature of the air. Your body temperature affects the temperature sensor.
- Time
-
The stopwatch time for the current activity.
- Time - Avg. Lap
-
The average lap time for the current activity.
- Time - Elapsed
-
The total time recorded. For example, if you start the timer and run for 10 minutes, then stop the timer for 5 minutes, then start the timer and run for 20 minutes, your elapsed time is 35 minutes.
- Time - Lap
-
The stopwatch time for the current lap.
- Time - Last Lap
-
The stopwatch time for the last completed lap.
- Time of Day
-
The time of day based on your current location and time settings (format, time zone, daylight saving time).
- Time to Dest.
-
The estimated time remaining before you reach the destination. You must be navigating for this data to appear.
- Time to Go
-
The time remaining in a course.
- Time to Next
-
The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.
- Total Ascent
-
The total elevation distance ascended since the last reset.
- Total Descent
-
The total elevation distance descended since the last reset.
- Vertical Speed
-
The rate of ascent or descent over time.
- VS - 30s Avg.
-
The 30-second moving average of vertical speed.