Skip to main content

Pairing the Remote with Your Edge Device

The first time you connect the Edge® remote to your Edge device, you must pair the remote with your device.

  1. Bring the remote within 3 m (10 ft.) of the device.
    NOTE: Stay 10 m (33 ft.) away from other ANT‍+® sensors while pairing.
  2. From the Edge home screen, select Menu symbol > Sensors > Add Sensor > Edge Remote.
  3. On the remote, hold two keys simultaneously until the status LED starts alternating green and red, and release the keys.

    The remote searches for your device. When the remote pairs successfully, the status LED flashes green 12 times, and the remote name appears on the device.

  4. Select the remote, and select Add.

After the remote is paired, it connects to your device whenever the device is in range and turned on.

Copyright © Garmin. All rights reserved.GUID-FB44B068-5BA7-4E3D-B4B3-B4555A20E7E7 v4