# Data Fields

Some data fields require optional accessories to display data.

The average heart rate for the current activity.

Cycling. The average cadence for the current activity.

The average lap time for the current activity.

The average speed for the current activity.

The remaining battery power.

The remaining battery power of a bike light accessory.

The headlight beam mode.

Cycling. The number of revolutions of the crank arm. Your device must be connected to a cadence accessory for this data to appear.

The amount of total calories burned.

The distance traveled for the current track or activity.

The remaining distance to the final destination. You must be navigating for this data to appear.

The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.

The total time recorded. For example, if you start the timer and run for 10 minutes, then stop the timer for 5 minutes, then start the timer and run for 20 minutes, your elapsed time is 35 minutes.

The altitude of your current location above or below sea level.

The estimated time of day when you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.

The estimated time of day when you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.

The calculation of rise (elevation) over run (distance). For example, if for every 3 m (10 ft.) you climb you travel 60 m (200 ft.), the grade is 5%.

The direction you are moving.

Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor.

The percentage of maximum heart rate.

The current range of your heart rate (1 to 5). The default zones are based on your user profile and maximum heart rate (220 minus your age).

Cycling. The average cadence for the current lap.

The distance traveled for the current lap.

The average heart rate for the current lap.

The number of laps completed for the current activity.

The average speed for the current lap.

The stopwatch time for the current lap.

The last point on the route or course.

The next point on the route or course.

The top speed for the current activity.

A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.

The 3-second moving average of power output.

The average power output for the current activity.

The accumulated work performed (power output) in kilojoules.

The average power output for the current lap.

The top power output for the current activity.

The current range of power output (1 to 7) based on your custom settings.

The current rate of travel.

The time of sunrise based on your GPS position.

The time of sunset based on your GPS position.

The stopwatch time for the current activity.

The time of day based on your current location and time settings (format, time zone, daylight saving time).

The estimated time remaining before you reach the destination. You must be navigating for this data to appear.

The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.

The total elevation distance ascended since the last reset.

The total elevation distance descended since the last reset.