Connector View


Device connector view with callouts

Item

Label

Description

Callout number one

POWER

Power and NMEA® 0183 devices

Callout number two

12 PIN XDCR

12-pin transducer

Callout number three

LVS XDCR

Panoptix™ LiveScope™ LVS12 12-pin transducer

Callout number four

NMEA 2000

NMEA 2000® network

Callout number five

NETWORK

Panoptix LiveScope sonar or Garmin® Marine Network for sharing sonar, charts, and user data

Callout number six

Ground screw

NOTICE

To prevent corrosion of the metal contacts, cover unused connectors with weather caps.

NOTICE

For best performance and to prevent corrosion, insert the cable connector fully into the port and turn the locking ring clockwise to tighten it. If the split-collar locking ring is not installed, you must install it.

NOTICE

To comply with regulations and to reduce noise, snap the ferrite beads on the network and transducer cables, near the connectors.

Copyright © Garmin. All rights reserved.GUID-E496ED9A-F874-45F8-BB02-F69A61BFB042 v6