My Vessel Settings

NOTE: Some settings and options require additional charts or hardware.

Select Settings > My Vessel.

Keel Offset

Offsets the surface reading for the depth of a keel, making it possible to measure depth from the bottom of the keel instead of from the transducer location (Setting the Keel Offset).

Temp. Offset

Compensates for the water temperature reading from a NMEA® 0183 water-temperature sensor or a temperature-capable transducer (Setting the Water Temperature Offset).

Vessel Type

Enables some chartplotter features based on the boat type.

Fuel Capacity

Sets the combined fuel capacity of all the fuel tanks on your vessel (Setting the Fuel Capacity of the Vessel).

Fill Up All Tanks

Sets the tank levels to full (Synchronizing the Fuel Data with the Actual Vessel Fuel).

Add Fuel to Boat

Allows you to enter the quantity of fuel you added to your tank, when you did not entirely fill up the tank (Synchronizing the Fuel Data with the Actual Vessel Fuel).

Set Total Fuel Onboard

Sets the combined amount of fuel in all the fuel tanks on your vessel (Synchronizing the Fuel Data with the Actual Vessel Fuel).

Set Gauge Limits

Sets the upper and lower limits of various gauges (Customizing Engine Gauge and Fuel Gauge Limits).

CZone™

Sets the digital switching circuits.

SeaStar Instance

Sets the digital switching circuits.

Hull ID

Allows you to enter the Hull Identification Number (HIN).The HIN might be permanently affixed to the upper starboard side of the transom or outboard side.

Copyright © Garmin. All rights reserved.GUID-0D15DF1D-FE0A-4101-9423-8240088D45C2 v5