Skip to main content

Changing the QuickFit Bands

  1. Slide the latch on the QuickFit® band, and remove the band from the watch.

    Close-up view of the QuickFit band being replaced
  2. Align the new band with the watch.
  3. Press the band into place.
    NOTE: Make sure the band is secure. The latch should close over the watch pin.
  4. Repeat steps 1 through 3 to change the other band.
Copyright © Garmin. All rights reserved.GUID-A642345F-528F-4D38-9458-B43A025FA972 v5